Detailing the surface of your car involves completely cleansing it and then utilizing car wax or other sealants to safeguard the paint and other external parts, such as the wheels and glass. Even though there is no “right” way or order in which to detail your automobile, these detailing tips will assist you in making your car look as great as brand-new all over again.
Rinse and Pre-Clean the Outside
Immediately employing soapy water to dry paint may harm the surface of your car. You could scrape filth and dirt into the paint’s finish. For this justification, it is sensible to first rinse as much dust as feasible from your vehicle with clean water. Next, you want to use a pre-cleaner to the parts of your motor vehicle where there’s persistent dirt, such as the tires and the low-down parts of the car. You can also use snow foam on the entire surface as a pre-wash, as eliminating as much potential filth from your vehicle prior to the real wash will avoid swirl stains and abrasions to the paint finish.
Select the Correct Soap and Utilize Two Pails
Even though you may be enticed to wash your car with dish liquid, you should instead select a nice-quality car shampoo as it will also thwart abrasions on your paint finish. Additionally, use two buckets: one filled with the wash mixture and the other containing fresh water. Use a mitt to employ the wash mixture and clean from the upper areas down in little segments. Prior to reapplying the mitt to a new area, wash it out it in the pail with fresh water rather than dipping it in the wash mixture again, so that you keep using clean wash water.
Dry the Car and Then Use a Detailing Mitt
Once you have completed cleaning the surface, wipe it with a microfiber cloth. If necessary, rinse out the cloth in the clean water every so often and twist and keep drying. Then, you need to go over the surface with a detailing mitt or a clay bar, as it will flatten out the exterior of your vehicle. Spray the detail mist or lubricant on a tiny area of the painted exterior and gently slide the mitt across the surface in a crosshatch configuration.
Polish and Wax
To provide your car that brand-new, fresh off the lot look, you should conclude the detailing procedure with a polish and wax. Even if you polish the car by hand, you will get the greatest results with a buffer, as it delivers pressure more uniformly than a manual pad. The final step requires using a good quality wax or another sealant, such as a ceramic coating.
While waxes are less expensive and add an appealing shine, they do not last for exceptionally long. In contrast, a ceramic coating presents outstanding defense and luster on a long-lasting basis. Nevertheless, it is more costly than wax. For the finishing touches, utilize tire dressing on your tires and cleanse your windows with a window cleaner.
The Best Detail at Myrtle Beach Detailing
Now, if you decide you don’t want to detail your vehicle yourself, just call Myrtle Beach Detailing and we can handle it for you!